AirLink Communications Raven X HSDPA Betriebsanweisung PDF herunterladen (Seite 120)

Raven XT

113 20080605

Firewall Range

Youcandefinethreedifferentrangesofstartandend.AllIP

addressesbetweenthestartoftherangeandtheendofthe

rangewouldbeallowed.

Forexample,ifRange1Startwassetto192.168.13.50andthe

Range1Endwassetto192.68.13.95,thentheIPaddressof

192.168.13.10 0wouldnotbeallowedsinceitwouldbeoutside

oftherange;but192.168.13.75wouldbeallowed.

PortFilteringModeallowsonly thedefineduserportsandcan

blockotherports.Portfilteringcan beconfiguredtoblock

connectionsonthespecifiedports(BlockedPorts),allow

connectionsonlyonthespecifiedports(AllowedPorts),ornot

blockorallowbasedonports(NotUsed).Eachspecifiedport

will

beallowedorblockeddependingonthePortFiltering

Mode.

Note: The Port Filtering is in addition to any port blocking or allowing

done by the cellular provider. If the port is blocked by the cellular

carrier, setting it for allowed here will have no effect since the

connection would be blocked before even reaching the Raven XE.

Port Forwarding

AnydatacominginonthedefinedPublicPortwillbepassed

tothecorrespondingPrivatePortconnectedtothephysical

interfacespecifiedandusingthehostIPaddress..

Note: This feature can be used only in private mode.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125

Keine Kommentare

AirLink Communications Raven X HSDPA Betriebsanweisung Seite 120