AirLink Communications Raven X HSDPA Betriebsanweisung PDF herunterladen (Seite 33)

Raven X HSDPA for Cingular - User Guide, version 2.33 28

CHAPTER 6 Hardware Installation

Your AirLink Raven X should be mounted in a position that allows easy access for the cables so

they are not bent or constricted. The LEDs on the front panel should be visible for ease of opera

tional verification. You should ensure that there is adequate airflow around the modem but that it is

kept free from direct exposure to the elements (sun, rain, etc.)

The integrated mounting with keyhole screw mounts on the Raven X will allow you to secure

your modem nearly anywhere, quickly and easily, without the need for a seperate bracket.

Modem placement with grounding information and diagrams of the mounting tabs

can be found in the Appendix, “Modem Placement” on page

31.

FIGURE 1. Raven X connecters

Connecting the Antenna

Antennas selected should not exceed a maximum gain of 5 dBi under standard installation config-

uration. In more complex installations (such as those requiring long lengths of cable and/or multi-

ple connections), it’s imperative that the installer follow maximum dBi gain guidelines in

accordance with the FFC’s regulations.

Your AirLink Raven X will work with most Dual-Band PCS cellular antennas with a connector

that works in the high and low frequencies of HSDPA . Connect the antenna or RF cable directly

to the antenna connector on the back of the Raven X.

Connecting Power

Primary Cellular

Power

Ethernet

Serial

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 106 107

Keine Kommentare

AirLink Communications Raven X HSDPA Betriebsanweisung Seite 33