AirLink Communications Raven X HSDPA Betriebsanweisung Seite 34

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 107
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 33
Raven X HSDPA for Cingular - User Guide, version 2.33 29
Hardware Installation
Your Raven X can be used with either DC (available in most automobiles) or 110 AC (standard US
wall power) with the appropriate power adapter (available from AirLink).
The power cable positive lead should be connected to the battery or power source positive termi-
nal. The power cable negative lead should be connected to the battery or power source negative ter-
minal.
When your Raven X is connected to power and an antenna, there is a specific pattern to the lights
to indicate its operation mode.
Note: When using a DC power source (such as a car battery or solar cell), AirLink
recommends placing a fuse (1-2 Amp) on the line close to the power source to pro
-
tect your power source from possible surges due to shorts or other line issues.
Connecting the Raven X to a computer or other device
Your Raven X’s Ethernet port can be connected directly to a computer or other Ethernet device
with either a cross-over cable or a straight-through cable. The Ethernet port on the Raven X is
auto-sensing. The Ethernet port will also auto-detect the speed of the connecting device and com
-
municate at 100baseTX or 10baseT.
Your Raven X’s serial port can be connected directly to most computers or other devices using a
standard straight through cable. If you have a DCE device, you will need a null modem or null
modem cable.
Your Raven X can also be connected to a USB to device connected to a computer or other device
which does not have an available port but does have USB.
Raven X Indicator Lights
FIGURE 2. Raven X indicator lights
Network - Indicates a successful connection to the cellular network with an IP address given and
a channel acquired.
Signal - Light shows the strength of the signal and may be nearly solid (strong signal) or flashing
(weaker signal). A slow flash indicates a very weak signal.
Activity - Lights will flash as data is transferred to and from the Raven X on the remote network.
Service - Indicates when the connection is HSDPA or UMTS. Unlit indicates EDGE or GPRS.
Seitenansicht 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 106 107

Kommentare zu diesen Handbüchern

Keine Kommentare